raidcom modify clpr
Error message
Executing/
Async
Error code
Description
SSB1 SSB2
CMDRJE Executing 2E30 000F The specified LDEV is used as a journal volume.
CMDRJE Executing 2E30 0083 The specified parity group includes HDEV with the
journal attribute.
CMDRJE Executing 2EE8 00F0 The specified command cannot be accepted
because the command is not supported.
CMDRJE Executing 2EE8 FEEC An internal error occurred.
Call Hitachi Data Systems customer support.
CMDRJE Executing 2EF3 0102 The specified parameter is invalid. Check the
Command Control Interface Command Reference.
CMDRJE Executing 2EF3 9F02 The specified operation cannot be performed
because it is not supported.
CMDRJE Executing 2EF6 FEEC An internal error occurred.
Call Hitachi Data Systems customer support.
Table 9-117 SSB codes returned by raidcom add spm_group
raidcom add spm_group
Error message
Executing/
Async
Error code
Description
SSB1 SSB2
CMDRJE Executing B9D4 B9D0 The command cannot be executed due to one of
the following reasons:
• Server Priority Manager is being used by
Storage Navigator or Device Manager -
Storage Navigator. Delete all settings of
Server Priority Manager using Storage
Navigator or Device Manager - Storage
Navigator.
• Server Priority Manager information for the
port WWN already exists in the system. Delete
Server Priority Manager information from
Performance Monitor.
CMDRJE Executing B9D4 B9D4 Server Priority Manager program product is not
installed.
CMDRJE Executing B9D4 B9D6 The number of Server Priority Manager groups
exceeds the maximum.
CMDRJE Executing B9D4 B9D8 The WWN which belongs to the specified host
group is registered in another SPM group.
CMDRJE Executing B9D4 B9D9 There is no WWN which belongs to the specified
host group.
CMDRJE Executing B9D4 B9DA The operation cannot be performed because it is
locked in another session.
Troubleshooting
9-163
Command Control Interface User and Reference Guide
To Next Page
Loading...
