Hitachi HUS VM - Page 490

raidcom add spm_wwn
Error message
Executing/
Async
Error code
Description
SSB1 SSB2
CMDRJE Executing B9D4 B9D4 Server Priority Manager program product is not
installed.
CMDRJE Executing B9D4 B9D7 The specified SPM name has already existed.
CMDRJE Executing D9D4 B9DA The operation cannot be performed because it is
locked in another session.
CMDRJE Executing D9D4 B9DC SPM cannot be operated without specifying the
host group because the specified WWN, SPM group
to which the SPM name belongs, or the specified
SPM group is associated with the host group.
Table 9-121 SSB codes returned by raidcom delete spm_wwn
raidcom delete spm_wwn
Error message
Executing/
Async
Error code
Description
SSB1 SSB2
CMDRJE Executing B980 B901 The command was rejected because the specified
port is for NAS Platform (System LU).
CMDRJE Executing B9D4 B9D0 The command cannot be executed due to one of
the following reasons:
• Server Priority Manager is being used by
Storage Navigator or Device Manager -
Storage Navigator. Delete all settings of
Server Priority Manager using Storage
Navigator or Device Manager - Storage
Navigator.
• Server Priority Manager information for the
port WWN already exists in the system. Delete
Server Priority Manager information from
Performance Monitor.
CMDRJE Executing B9D4 B9D2 The configuration WWN or nickname does not
exist.
CMDRJE Executing B9D4 B9D4 Server Priority Manager program product is not
installed.
CMDRJE Executing D9D4 B9DA The operation cannot be performed because it is
locked in another session.
CMDRJE Executing D9D4 B9DC SPM cannot be operated without specifying the
host group because the specified WWN, SPM group
to which the SPM name belongs, or the specified
SPM group is associated with the host group.
9-166
Troubleshooting
Command Control Interface User and Reference Guide