Hitachi L200 Series Service Manual
















HITACHI INVERTER
SJ200/L200Series
SERVICE MANUAL

NBS650X
After reading this manual, keep it at hand for future reference

(ADJUSTMENT AND MAINTENANCE)
Model:
EuropeanVersion
SJ200/L200‑002NFE(F)toSJ200/L200‑022NFE(F)
SJ200/L200‑004HFE(F)toSJ200/L200‑075HFE(F)

USVersion
SJ200/L200‑002NFUtoSJ200/L200‑022NFU
SJ200/L200‑037LFUtoSJ200/L200‑075LFU
SJ200/L200‑004HFUtoSJ200/L200‑075HFU


Hitachi L200 Series Specifications

General

Output Frequency	0.1-400Hz
Communication	RS-485 (Modbus RTU)
Frequency Range	0.1-400Hz
Operating Temperature	-10°C to +50°C
Storage Temperature	-20°C to +65°C
Input Voltage	200-240V
Control Method	V/f control, Sensorless vector control
Overload Capacity	150% for 60 seconds
Protection	Overcurrent, overvoltage, undervoltage, overload, overheating, short circuit
Output Voltage	3-phase, 0 to input voltage
Cooling Method	Forced air cooling
Humidity	5% to 95% RH (non-condensing)
Altitude	Up to 1000m without derating
Braking Unit	Built-in braking transistor (for models up to 7.5kW), External braking resistor can be connected