Need help?Do you have a question about the Hitachi L100 and is the answer not in the manual?
General| Series | L100 |
|---|---|
| Control Method | V/f Control, Sensorless Vector Control |
| Overload Capacity | 150% for 60 seconds |
| Frequency | 50/60 Hz |
| Output Frequency | 0-400 Hz |
| Protection | Overcurrent, Overvoltage, Undervoltage, Overheat, Ground Fault |
| Horsepower Range | 0.5HP to 2HP |
| Dimensions | Varies by model |
| Weight | Varies by model |
Details precautions and hazards associated with high voltage during operation and maintenance.
Guides through the essential steps for installing the inverter.
Lists warnings and cautions to review before performing inverter wiring.
Guides on selecting appropriate wire sizes and fuse capacities based on motor output.
Details the procedure for connecting the inverter's input power supply.
Explains how to connect the motor to the inverter's output terminals.
Guides through the final installation verification and initial motor run.
Explains the use of the inverter's front panel keypad for monitoring and programming.
Details how to configure and use the inverter's intelligent input terminals for various functions.
Explains how to configure and use the inverter's intelligent output terminals for signals and alarms.
Explains how to configure and use the built-in PID loop for process control.
Provides safety messages and general precautions for troubleshooting the inverter system.
Explains how to monitor inverter faults, trip events, and their history for diagnostics.
To Next Page
