Hitachi NV45AB2(S) User Manual

NV 45AB2
•
NV 45AB2(S)
DANGER
Improper use of this Nailer can result in death or serious injury!
This Manual contains important information about product safety.
Read and understand this Manual before operating the Nailer.
Never allow anyone who has not reviewed this manual.
DANGER
Une utilisation incorrecte et sans respecter la sécurité de ce cloueur risque d’entraîner
la mort ou des blessures graves !
Ce manuel renferme des instructions importantes sur la sécurité de l’outil.
Lire et bien assimiler ce manuel avant d’utiliser le cloueur.
Ne jamais laisser les personnes n'ayant pas étutdié le manuel utiliser l'outil.
PELIGRO
¡La utilización inadecuada e insegura de este clavador puede resultar en lesiones serias
o en la muerte!
Este manual contiene información importante sobre la seguridad del producto.
Lea y entienda este manual antes de utilizar el clavador.
No deje manejar esta herramienta a nadie que no haya leído este manual.
Instruction and safety manual
Manuel d'instructions et de sécurité
Instrucciones y manual de seguridad
Model
Modèle
Modelo
Nailer
Cloueur
Clavador
NV45AB2 NV45AB2(S)
00Cover_NV45AB2_US 2/26/09, 11:451

Hitachi NV45AB2(S) Specifications

General

Type	Coil Roofing Nailer
Operating Pressure	70-120 psi
Firing Mode	Contact or Sequential
Weight	5.5 lbs
Nail Size	7/8 inch to 1-3/4 inch
Nail Gauge	0.120 inch
Magazine Capacity	120 nails

Summary

SAFETY

General Safety Instructions for Nailers

Crucial safety rules for operating nailers to prevent injury and death.

NV45AB2 Coil Nailer Safety

NV45AB2(S) Coil Nailer Safety

Specific safety precautions for the NV45AB2(S) model.

OPERATION

AIR SUPPLY

Power Source Requirements

LUBRICATION

TESTING THE NAILER

Safety and Operational Checks

LOADING NAILS

Adjusting Air Pressure

NAILER OPERATION

Methods of Operation

Different modes of nail driving: intermittent and continuous.

MAINTENANCE AND INSPECTION

Clearing a Jam

SERVICE AND REPAIRS

Qualified Service Personnel

Information on obtaining professional service and authorized repairs for the nailer.

OPERATOR TROUBLESHOOTING

Problem Solutions and Maintenance Chart

Common problems, their causes, and recommended corrective actions.