Hitachi P12RA - Page 2

IMPORTANT INFORMATION
Most accidents of power tool operation and maintenance are caused by failure to observe basic
safety rules or precautions. An accident can often be avoided by recognizing potentially hazardous
situations before it occurs.
Read and understand all safety precautions and warnings before operation and maintenance.
Basic safety precautions are outlined in the "SAFETY section of this manual and in descriptions
of operation and maintenance.
Operations that may cause bodily injury or machine damage are identified by CAUTION signs on
the machine and in this manual.
Hitachi cannot anticipate every possible circumstance that might involve a potential hazard.
The CAUTIONS in this manual and on the machine are therefore not all inclusive.
Ға procedure, too! or work method or operating technique not specifically recommended by Hitachi
is used, you must satisfy yourself that it is safe for you and others.