Hitachi PC-AR - Initialization of Optional Setting and Input;Output Setting; Initialization Procedure

6
No. Items Optional Function
Individual
Setting
Setting
Condition
Contents
15 C1 Not Prepared-
00
01
Not Used
(Use as 00 conditions)
16 C2 Not Prepared-"- -" Fixed Not Used
17 C3 Not Prepared
00
01
Not Used
(Use as 00 conditions)
18 C4 Not Prepared
00
01
Not Used
(Use as 00 conditions)
19 C5 Hi Speed
00
01
02
Not Available
Hi Speed 1 (*2)
Hi Speed 2 (*2)
20 C6 Hi Speed at Heating Thermo-OFF
00
01
Not Available
Available
21 C7
Canceling of Enforced 3 Minutes
Minimum Operation Time of
Compressor
00
01
Available
Not Available
22 C8 Thermistor of Remote Control Switch
00
01
02
Control by Indoor Suction Thermistor
Control by Thermistor of
Remote Control Switch
Control by Average Value of
Indoor Suction Thermistor and
Thermistor of Remote Control Switch
23 C9 Not Prepared-"- -" Fixed Not Used
24 CA Not Prepared-"- -" Fixed Not Used
25 Cb Selection of Forced Stoppage Logic
00
01
Forced Stoppage Input: A Contact
Forced Stoppage Input: B Contact
26 CC Not Prepared
00
01
Not Used
(Use as 00 conditions)
27 Cd Not Prepared
00
01
Not Used
(Use as 00 conditions)
28 CE Not Prepared-
00
01
Not Used
(Use as 00 conditions)
29 CF Change of Louver Swing Angle
00
01
02
Standard (7 Steps)
Draft Prevention (5 Steps)
High Ceiling (5 Steps) (*3)
30 d1 Not Prepared
00
01
Not Used
(Use as 00 conditions)
31 d2 Not Prepared-"- -" Fixed Not Used
32 d3 Power Supply ON/OFF 2
00
01
Not Available
Available
33 d4
Prevention for Cooling Discharge Air
Temp. Decrease
00
01
Not Available
Available
34 d5
Prevention for Heating Discharge Air
Temp. Decrease
00
01
Not Available
Available
35 d6
Room Temp. Control for Energy
Saving
00
01
Not Available
Available
36 d7 Not Prepared
00
01
02
03
04
05
06
07
Not Used(Use as 00 conditions)
37 E1 Ventilation Mode
00
01
02
Automatic Ventilation
Ventilation by Total Heat Exchanger
Bypass Ventilation
(No Total Heat Exchanging)
38 E2 Increasing Supply Air Volume
00
01
Not Available
Available
39 E3 Not Prepared
00
01
Not Used
(Use as 00 conditions)
40 E4 Precooling / Preheating Period
00
01
02
Standard
30 min.
60 min.
41 E5 Not Prepared
00
01
Not Used
(Use as 00 conditions)
42 E6
Indoor Fan Operation Time After
Cooling Operation Stoppage
00
01
02
Not Available
60 min.
120 min.
X
X