20
PMEN0602 rev.0 - 05/2023
1
CONTROLLERCONFIGURATION
PC-ARFH1E FUNCTIONALITIES
• Select Yes if an electrical backup heater is installed.
• Press OK buon.
• Select the bivalent point for boiler or electric backup heater (from -20 ºC to 20 ºC).
• Press OK buon.
• Select the type of room thermostat installed in circuit 1 or 2 (depending on the previous
seng): None, wired or wireless.
• Repeat this step in case of circuit 2.
• Press OK buon.
• Conguraon assistant is completed.
• Press OK buon to go to the main screen.