To Next PageTo Next Page
Need help?Do you have a question about the Hitachi PR-38E and is the answer not in the manual?
General| Chuck Type | SDS-Plus |
|---|---|
| Impact Energy | 3.2 Joules |
| Drilling Capacity in Steel | 13 mm |
| Drilling Capacity in Wood | 32 mm |
| Weight | 2.8 kg |
| Drilling Capacity (Wood) | 32 mm |
Maintain a clean and well-lit workspace to prevent accidents.
Ensure proper grounding and cord handling to prevent electric shock.
Stay alert, use safety equipment, and avoid accidental starting for personal protection.
Utilize the correct tool, maintain it, and store it safely to ensure longevity.
Have power tools serviced by qualified personnel with identical replacement parts.
Confirm power source meets product requirements for safe operation.
Ensure proper grounding via the three-conductor cord for operator safety.
Verify the power switch is OFF before plugging in to prevent accidental starts.
Use a suitable, thick-gauge extension cord for remote power source locations.
Add oil to the tank as instructed before initial operation of the tool.
Mount drill bits, bull points, and other accessories securely and correctly.
Apply drill bit tip, press lightly, and maintain a firm grip for controlled drilling.
Use the tool's weight and position the bit for effective chipping or crushing.
Attach adapter, create base hole, and drive anchor with impact action.
Attach anchor, drill hole, then drive with hand hammer for secure fastening.
Fit drill bit to adapter, drill to depth, then drive anchor using a manual hammer.
Mount core bit onto shank, lubricate, and attach to the drill body.
Insert plug, press center pin, drill to 5mm, then remove pin and plate.
Use impact operation to loosen screw, then strike shank to facilitate removal.
Check drill bits for wear and resharpen or replace to maintain efficiency.
Regularly check and tighten all mounting screws to ensure operational safety.
Protect the motor winding from damage and moisture for optimal performance.
Inspect carbon brushes for wear and replace them when they reach the limit.
Examine the dust cover for wear and replace it if compromised to protect internals.
Consult authorized service centers for repairs and replacement parts.
