To Next PageTo Next PageWhy is the scheduled operation not working on my Hitachi Control Unit?
If the Hitachi Control Unit scheduled operation isn't working, verify that the holiday setting is turned OFF. Also, ensure that the setting for scheduled operation is turned ON.
What does it mean if a part of the Hitachi Control Unit touchscreen is not turned ON?
If a part of the Hitachi Control Unit touchscreen is not turned ON or is constantly turned ON, it may be due to a dead pixel on the LCD. This is not faulty.
Why does the louvre direction on my Hitachi Control Unit return to the previous setting?
If the setting of louvre direction returns to previous setting on your Hitachi Control Unit, it may be because the operation mode is set to “AUTO”. In this mode, the direction of louvre is automatically corrected depending on the indoor unit model.
How to wake up the Hitachi Control Unit touchscreen display?
If the Hitachi Control Unit touchscreen display is slept, tap the screen to wake it up.
How to fix scheduled operation not working on Hitachi PSC-A32MN?
If the scheduled operation on your Hitachi Controller isn't working, first check if the holiday setting is turned on. If it is, cancel the holiday setting. Also, verify that the setting of scheduled operation is turned on.
How to fix Hitachi Control Unit touchscreen when indications are not displayed?
If the indications on the Hitachi Control Unit touchscreen are not displayed, check that the wiring for the power supply is connected to the plug and that the power supply is turned ON.
What to do if the remote control switch does not match with the main controller on Hitachi Control Unit?
If the remote control switch does not match with the main controller of your Hitachi Control Unit when the indoor unit is recovering from a power failure, it could be due to an unstable power supply during the recovery. Use the main controller to match with the remote control switch.
How to set date and time on Hitachi Control Unit if it indicates “- -”?
If “- -” is indicated for the date and time on your Hitachi Control Unit, you should set the date and time again according to the item 8.6.
How to fix Hitachi Control Unit schedule operation that does not run?
If the Hitachi Control Unit schedule operation does not run, verify that the holiday setting is not active. If it is, cancel the holiday setting according to item 8.4.2. Also, check if the schedule operation setting is turned off. If it is, turn it on according to item 8.4.3.
Why setting of louvre direction returns to previous setting on Hitachi Controller?
When the operation mode is set to “AUTO” on your Hitachi Controller, the direction of the louvre is automatically corrected depending on the indoor unit model. This is why the setting of louvre direction returns to previous setting.
General| Category | Controller |
|---|---|
| Type | Programmable Logic Controller |
| Input Voltage | 100-240 VAC |
| Frequency | 50/60 Hz |
| Power Consumption | 30 W |
| Operating Temperature | 0°C to 55°C |
| Storage Temperature | -20°C to 70°C |
General safety warnings, DANGER, CAUTION, and appliance usage guidelines.
Describes the central station's capabilities and lists available functions.
Guidance on choosing a suitable location for the central station.
Lists all the parts included in the package for the central station.
Details the individual components and their functions on the central station unit.
Provides technical specifications and physical dimensions of the central station.
Specifies required space and step-by-step physical installation instructions.
Explains wiring requirements, diagram, types, and specifications.
Guide to setting the DIP switches and rotary switches on the unit.
Outlines the procedure for performing an initial test of the central station's functions.
Guide to configuring operational patterns for groups or blocks.
Managing the registration, cancellation, and checking of groups and units.
Navigating and interacting with the central station's main monitor screen.
Accessing and configuring various system settings through the menu.
Accessing and using service-specific functions for advanced configuration and diagnostics.
Explains various icons and indicators displayed on the LCD screen.
