– 13 –
ENGLISH
SILENT OPERATION
ƽ By pressing (SILENT) button during AUTO, HEATING, DEHUMIDIFYING, COOLING or FAN
operation, the fan speed will change to ultra slow.
Ƶ To start SILENT operation
Ƶ To cancel SILENT operation
Press (SILENT) button during operation.
“
” is displayed on the LCD. Fan speed will be ultra
slow.
ƽ Press (START/STOP) button. Or
ƽ Press (SILENT) button again or (FAN SPEED)
button.
Fan speed will return to previous fan speed before SILENT
operation starts.
SILENT operation stops.
“
” disappears from the LCD.
1
NOTE
ƽ When POWERFUL operation is selected, SILENT operation is cancelled. Fan speed will return to
previous fan speed before SILENT operation.
ƽ After auto restart, SILENT operation is cancelled. Fan speed will return to previous
fan speed before SILENT operation.
ƽ During any operation with fan speed (SILENT), if press (SILENT) button, fan speed will
not change.
ƽ
– 14 –
ECO OPERATION
ƽ By pressing the (ECO) button during AUTO, HEATING,
DEHUMIDIFYING or COOLING operation, the air conditioner
performs the "ECO" operation.
1
Ƶ To start ECO operation
ƵTo cancel ECO operation
Press (ECO) button during operation.
“
” is displayed on the LCD.
Energy saving operation will start by changing the set
temperature higher or lower automatically and reducing operation
power consumption. This function may vary based on the
ƽ Press (START/STOP) button.Or
ƽ Press (ECO) button again.
“
” disappears from the LCD.
NOTE
ƽ ECO function will not be effective when power consumption is low.
ƽ By pressing (POWERFUL) button, ECO operation is cancelled.
ƽ After auto restart, ECO operation is cancelled and previous operation mode shall start.
ƽ For multi model connections, energy saving operation shall only start by changing set temperature higher
connected outdoor unit.
or lower automatically. However, effectiveness of ECO depends on operation conditions.
ECO operation is an energy saving function by changing set temperature automatically and by limiting the
ma x imum power consumption value.
ƽ
To Next Page
Loading...
