Hitachi RAC-25WPB - Once Timer (On;Off) Operation; ECO Sleep Timer Operation

– 17 –
ENGLISH
ONCE TIMER (ON/OFF TIMER) OPERATION
The device can be set to turn off at a preset time. 1. Press
(OFF-TIMER) button. and blink on the display.
2. Set the "turn-off time" with
(TIME) button.
3. After setting, direct the remote controller towards the indoor and press
(SEND) button.
and "set time" lights up instead of blinking.
A beep sound emitted from indoor unit and the (TIMER) lamp on the
indoor unit lights up.
ON TIMER The device will turn on at a designated time. 1. Press
(ON-TIMER) button. and blink on the display.
2. Set the "turn-on time" with
(TIME) button.
3. After setting, direct the remote controller towards the indoor and press
(SEND) button.
and "set time" light up instead of blinking.
A beep sound emitted from indoor unit and the (TIMER) lamp on the indoor
unit lights up.
ON/OFF TIMER
ƽ The device will turn on (off) and off (on) at the designated time. ƽ The switching occurs first at the preset time that comes earlier. ƽ The arrow mark appears on the display to indicate the sequence of switching
operations.
1. Press
(OFF-TIMER) button so that and blink on the
display.
2. Set the "turn-off" time with
(TIME) button. After setting, direct the remote
controller towards the indoor and press
(SEND) button.
3. Press
(ON-TIMER) button so that and set "turn-off" time light up.
The
and blink.
4. Set the "turn-on" time with
(TIME) button.
5. After setting, direct the remote controller towards the indoor and press
(SEND) button
and set "turn-on" time light up instead of blinking.
A beep sound emitted from indoor unit and the (TIMER) lamp on the indoor
unit lights up.
Ƶ
The timer may be used in three ways: OFF-timer, ON-timer and ON/OFF (OFF/ON)-
timer. Set the current time first because it serves as a reference.
Ƶ
To cancel Reservation
ƽ
Point the signal window of the remote controller towards the indoor unit and press (CANCEL) button.
and "ON or OFF set time" goes out with a beep and the (TIMER) lamp on the indoor unit turns off.
NOTE
ƽ
User can set only one of the OFF-timer, ON-timer or ON/OFF-timer.
ƽ
If WEEKLY TIMER already set, by setting the ONCE TIMER, ONCE TIMER operation is prioriti zed. When
ONCE TIMER operation is complete, WEEKLY TIMER operation will be activated.
OFF TIMER
1
– 18 –
Press (SLEEP) button during operation. ƽ “ ”, “ ”, “ ”, “OFF”, off time, “ ” and number
of hour are displayed on the remote controller display.
ƽ During ECO SLEEP TIMER operation, fan speed will be ultra ƽ A beep sound emitted from indoor unit and the (TIMER) lamp
on the indoor unit lights up.
Pressing
(SLEEP) button repeatedly, the number of hours
ƽ During ECO SLEEP TIMER operation, air conditioner will ƽ
When the ECO SLEEP TIMER has been set, the display on
Press
(START/STOP) button.
ƽ Room air conditioner will switch off.
Press
(SLEEP) button again until “ ”, “ ”, “ ”,
off time, “
” and number of hour disappear from the remote
controller display. Press
(CANCEL) button.
ƽ A beep sound emitted from indoor unit and the (TIMER) lamp
on the indoor unit turns off.
ƽ SLEEP TIMER operation is cancelled.
1
1 H 2 H 3 H 7 H
SLEEP TIMER off
will change as below:
continue to operate for the designated number of hours and then turn off. the remote controller indicates the turn off time.
E C O SLEEP TIMER OPERATION
By pressing (SLEEP) button during AUTO, HEATING, DEHUMIDIFYING, COOLING or FAN operation,
.gni vas ygrene ni stluser tl .deeps naf eht secuder dna erutarepmet moor eht stfihs tinu eht
The timer can be set up to a duration of 7 hours.
Set the current time first before operating the ECO SLEEP TIMER operation.
Ƶ To start EC O SLEEP TIMER operation
slow.
Example: If ECO SLEEP TIMER is set for 1 hour at 18:00, the switch off time will be at 19:00.
Ƶ To cancel ECO SLEEP TIMER operation
18