ENGLISH
ONCE TIMER (ON/OFF TIMER) OPERATION
The device can be set to turn o at a preset time.
1. Press (OFF-Timer) button.
and blink on the display.
2. Set the "turn-o time" with (TIME) button.
3. After setting, direct the remote controller towards the indoor and press
(Send) button.
and "set time" lights up instead of blinking.
A beep sound emitted from indoor unit and the (TIMER) lamp on the
indoor unit lights up.
ON TIMER
The device will turn on at a designated time.
1. Press (ON-Timer) button. and blink on the display.
2. Set the "turn-on time" with (Time) button.
3. After setting, direct the remote controller towards the indoor and press
(Send) button.
and "set time" light up instead of blinking.
A beep sound emitted from indoor unit and the (Timer) lamp on the indoor
unit lights up.
ON/OFF TIMER
• The device will turn on (o) and o (on) at the designated time.
• The switching occurs fi rst at the preset time that comes earlier.
• The arrow mark appears on the display to indicate the sequence of switching
operations.
1. Press (OFF-Timer) button so that and
blink on the
display.
2. Set the "turn-o" time with (Time) button. After setting, direct the remote
controller towards the indoor and press (Send) button.
3. Press (ON-TIMER) button so that and set "turn-o" time light up.
The and blink.
4. Set the "turn-on" time with (TIME) button.
5. After setting, direct the remote controller towards the indoor and press
(Send) button
and set "turn-on" time light up instead of blinking.
A beep sound emitted from indoor unit and the (Timer) lamp on the indoor
unit lights up.
■ The timer may be used in three ways: OFF-timer, ON-timer and ON/OFF (OFF/
ON)-timer. Set the current time fi rst because it serves as a reference.
■ To cancel Reservation
• Point the signal window of the remote controller towards the indoor unit and press (Cancel) button.
and "ON or OFF set time" goes out with a beep and the (TIMER) lamp on the indoor unit turns o.
NOTE
• User can set only one of the OFF-timer, ON-timer or ON/OFF-timer.
• If Weekly Timer already set, by setting the Once Timer, Once Timer operation is prioritized. When Once
OFF TIMER
1