– 12 –
2 Press the
(TIME) button.
3 Set the current
time with the
TIMER control button.
4 Press the (TIME)
button again.
The time indication starts
lighting instead of fl ashing.
HOW TO SET THE TIMER
You can set the
device to turn
off at the preset
time.
After you
change the
batteries.
1 Set the
(TIME) button.
1 Press the
(OFF-TIMER)
button. The
(OFF) mark blinks
on the display.
1 Press the
(ON-TIMER) button
the (ON) mark
blinks on the
display.
●
The device
will turn
on at the
designated
times.
TIME
OFF TIMER
ON TIMER
RESERVE
CANCEL
● The time indication will disappear
automatically in 10 second.
● To check the current time setting,
press the (TIME) button twice.
The setting of the current time is
now complete.
Example: The current
time is 1:30 p.m.
3 Point the signal window of the remote controller
toward the indoor unit, and press the (RESERVE)
button.
The (OFF) mark starts lighting instead of fl ashing
and the sign (RESERVED) lights. A beep occurs
and the (TIMER) lamp lights on the indoor unit.
2 Set the turn-
off time with the
TIMER control
button.
The setting of turn-off time is now complete.
Example: The device will turn off at 11:00p.m.
Example:
The device will turn on at 7:00 a.m.
The setting of the turn-on time is now complete.
3 Point the signal window of the remote controller
toward the indoor unit, and press the (RESERVE)
button.
The (ON) mark starts lighting instead of fl ashing
and the (RESERVED) sign lights. A beep occurs
and the (TIMER) lamp lights on the indoor unit.
2 Set the turn-
on time with the
TIMER control
button.
RAS-10-14MH1 6-16 12RAS-10-14MH1 6-16 12 3/10/14 3:34 PM3/10/14 3:34 PM
To Next Page
Loading...
