Hitachi RAS-24MH1 - HOW TO SET THE TIMER

– 16 –
HOW TO SET THE TIMER
You can set the device to turn off
at the preset time.
After you change the
batteries;
How to Cancel Reservation
Point the signal window of the remote controller toward the indoor unit, and press the (CANCEL) button.
The (RESERVED) sign goes out with a beep and the (TIMER) lamp turns off on the indoor unit.
1 Press the (TIME) button.
1 Press the (OFF-TIMER)
button, until the
(OFF) mark
blinks on the display.
NOTE
You can set only one of the OFF-timer,
ON-timer and ON/OFF-timer.
● The device will turn on at
the designated times.
TIME
OFF TIMER
ON TIMER
RESERVE
CANCEL
2 Set the turn-off time
with the TIMER control
button.
Press the
(RESERVE)
button.
3 Press the (ON-
TIMER) button so that the
(OFF) mark lights and
the
(ON) mark blinks.
1 Press the (ON-TIMER)
button the
(ON) mark blinks
on the display.
● The device will turn on (off) and off
(on) at the designated times.
● The switching occurs fi rst at the
preset time that comes earlier.
● The arrow mark appearing on the
display indicates the sequence of
switching operations.
1 Press the (ON-OFF)
button so that the
(OFF)
mark blinks.