– 8 –
INSTALLING ANTI-MOLD WASABI CASSETTE
Open the front panel.
•
Do not hold the movable panel
when opening and closing the
front panel.
Movable panel
Front panel
Gripping part
Panel support
•
Hold and lift up the front panel.
•
Push up the panel support until it
clicks to lock it.
•
Lower the front panel and fix in
position with the panel support.
CAUTION
•
Do not use excessive force to open and close the movable
panel.
This may cause it to malfunction.
(The movable panel automatically open and close when the power
is ON/OFF and START/STOP.
)
•
Do not open the front panel during operation
.
It may interrupt the movable panel to work properly. Be sure to stop
the operation first before opening the front panel.
Install the anti-mold wasabi cassette.
•
Pull out the anti-mold wasabi
cassette case.
•
Take out the anti-mold wasabi
cassette from the aluminium bag.
Anti-mold wasabi
cassette
Aluminium bag
Anti-mold wasabi
cassette case
•
Hold the anti-mold wasabi
cassette with the handle
side toward you, and then
install it into the unit.
•
Slide the anti-mold
wasabi cassette that
has been taken out of
the wrapper directly
into the anti-mold
wasabi cassette case.
Do not remove or tear
the aluminium sheet on
the surface nor make a
hole on it.
CAUTION
• Do not put your face close to the package when you
open it.
Your eyes or nose may be irritated by wasabi aroma.
• Do NOT eat.
1
2
No daily maintenance is required. However,
the effectiveness of anti-mold wasabi cassette
will be lost after approximately 10 years have
elapsed. Replace the anti-mold wasabi cassette
in such event.
To Next Page
Loading...
