Hitachi RAS-(3-6)HVNC1(E) - Page 201

6 Optional functions
187
SMGB0087 rev.0 - 12/2013
6
Element Optionalfunction
Individual
setting
Settings Settingconditions Description
F6
Automatic reset
temperature for
heating
X
17 17 ºC
This function is used to set automatic
temperature release in HEAT mode.
18-20 (18-20) ºC
21
21 ºC
(factory setting)
25-28 (25-28) ºC
29 29 ºC
30 30 ºC
PC-ART: Not
available
– 17-30 Not available –
F7
Operation stoppage
prevention by remote
control switch
operational error
(5)
X 00
Not activated
function
–
01 Activated function
PC-ART: Not
available
– 00-01 Not available –
F8
Lock function for
operation mode
selection
X
00
Not activated
function
This function is used to prevent changes
to the operating mode.
01
Activated function
(factory setting)
F9
Lock function for
temperature setting
X
00
Not activated
function
This function is used to prevent changes
to the temperature setting.
01
Activated function
(factory setting)
FA
Lock function for fan
speed selection
X
00
Not activated
function
This function is used to prevent changes
to the fan speed.
01
Activated function
(factory setting)
Fb
Lock function for
swing louver
operation
X
00
Not activated
function
This function is used to prevent changes
to automatic louver operations.
01
Activated function
(factory setting)
FC
Lower limit of set-
ting temperature for
cooling
X
00 Standard
This function is used to dene a lower
temperature setting limit for FAN/COOL/
DRY modes.
01 Lower limit +1 ºC
02 Lower limit +2 ºC
03-08
Lower limit
+(03-08) ºC
09 Lower limit +9 ºC
10 Lower limit +10 ºC
Fd
Upper limit of setting
temperature for heat-
ing
X
00 Standard
This function is used to dene an upper
temperature setting limit for HEAT mode.
PC-ARF: up to -12 ºC
01 Lower limit -1 ºC
02 Lower limit -2 ºC
03-08
Lower limit
-(3~8) ºC
09 Lower limit -9 ºC
10 Lower limit -10 ºC
FE
Not available –
00
Not available
Use at 00 conditions
–01
02