Powerful Operation
• During Powerful operation, cooler or warmer air will be blown out from indoor unit for Cooling or
Heating operation respectively.
NOTE
•
Press the
(Powerful) button during operation.
• " " is displayed on the LCD.
Powerful operation ends in 20 minutes. Then the system
automatically operates with the previous settings used before
Powerful operation.
START
Press the
• " " disappears from the LCD.
CANCEL
•
Press the (On/Off) button. or
(Powerful) button again.
• When Eco Operation, LeaveHome Operation,Silent Mode, GoodSleep Timer or My mode is selected ,
Powerful Operation will be cancelled.
• During Powerful operation, capacity of the air conditioner will not increase
– if the air conditioner is already running at maximum capacity.
– just before defrost operation (when the air conditioner is running in Heating operation).
LeaveHome Operation
NOTE
• During LeaveHome operation, fan speed and horizontal air defl ector position cannot be changed.
Prevent the room temperature from falling too much when no one is at home .The initial setting
temperature is 10.0℃ and the temperature range can be set between 10.0℃ and 16.0℃.
Press
(LeaveHome) button during stop or
operation.
Room temperature is set at 10.0℃ and heating operation
starts.
Set the desired room temperature with the Temperature
buttons.Temperature range can be set between 10.0℃
and 16.0℃.
• " ", " ", "
", "Set Temperature" is
displayed on the LCD.
Press the (On/Off) button. or
Press the (LeaveHome) button again.
Change to other Operation Mode.
1
2
START
CANCEL
performs at maximum power.
By pressing
(Powerful) button during Auto, Heat, Dry, Cool, or Fan operation, the air conditioner
Powerful
Powerful
Powerful
To Next Page
Loading...
