Hitachi RPC-2.0FSR - Appearance; Features On Indoor Units; Features on Indoor Units

FEATURES
1-6
TCI-20007-rev.1
1.2 Appearance
1.3 Features on Indoor Units
The wired controller “PC-ARF1” must be used for this ceiling type indoor units.
NOTICE
The details are described as follows.
Characteristic Outline
Improvement of Energy Saving
(1) The energy saving has been achieved with the
combination of current outdoor units.
(2) The energy saving is improved by the optional
motion sensor.
• High e󰀩ciency has been achieved by adopted fan
runner and fan motor and the performance of heat
exchanger has also been improved.
• The motion sensor function controls the setting
temperature, air ow volume and air ow direction,
according to the extent of human activity.
High E󰀩ciency and Low Noise by Adopting Fan
Runner
With fan runner with L-shaped ns, the air ow between
ns has been improved and low noise has been
achieved.
Louver Design • Large-sized amenity auto louver softens the discomfort
by temperature irregularity and cold draft.
• The auto louver as a shutter during the operation
stoppage improves design.
Flexibility of Installation to High Ceiling The air ow volume “HIGH 2” has been added, which is
larger than “HIGH”.
Added Optional Receiver Kit • The air ow volume “HIGH 2” can be selected with the
wireless controller.
• By using the wired controller, the unit can be connected
to the motion sensor kit.