Hitachi RPI-2.5FSG1 - Page 218

2-78
SERVICING
(2.5 2-Way Cassette Type)
(4) Remove two (2) screws fixing the motor assembly and remove two (2) stoppers by lifting the motor
assembly upwards (to the arrow direction) by hand.
The stopper can be removed by pulling. The motor assembly can be removed by removing the
connector at the same time.
TURN OFF all power source switches.
Phillips ScrewdriverTool
(5) Remove one (1) screw fixing the crank and cut the plastic tie fixing the motor cord.
Remove the motor after removing two fixing screws.
Phillips ScrewdriverTool
Motor Assembly
Connector
Stopper
Screws
Screw
Screws
Motor
Motor Assembly
Crank
Plastic Tie
Motor