Hitachi RPI-8/10FSN3E - Mounting Method; Thermistor Installation

2 Unit installation
SMGB0077 rev.0 - 01/2013
71
2
S
2.10.3 Mounting method
1
.8
N
m
4
3
21


b c
da

1
.8
N
m
4
3
21
N O T E
In case of installation positions “c” and “d”, make sure to insulate the copper pipes inlet on the expansion valve
boxcovertoavoidanyliquidltrationandaccumulation.
Minimum sizes (mm).
2.10.4 Thermistor installation

Liquid and gas pipes thermistor
Two type thermistors are supplied inside the control box. The purpose and identication of each one is as follow:
Item
PCB socket / Thermistor
connector color
PCB socket number Thermistor length (mm)
Liquid pipe thermistor Black THM 3 650
Gas pipe thermistor Yellow THM 5 600