Hitachi S1-00073HFE

S1 series standard inverter
-94-
Function
code
Name
Detailed parameter description
Default
value
Modify
command
selection
4: Set via high speed pulse HDIA
5: Reserved
6: Set via multi-step speed running
7: Set via PID control
8: Set via Modbus communication
9–15: Reserved
Note: for models 4kW and above
1: No function
2: AI1
3: AI2
P00.08
Reference object
of B frequency
command
0: Max. output frequency
1: A frequency command
0
○
P00.09
Combination
mode of setting
source
0: A
1: B
2: (A+B)
3: (A-B)
4: Max. (A, B)
5: Min. (A, B)
0
○
P00.10
Set frequency via
keypad
When A and B frequency commands are set by
keypad, the value is the initial digital set value of
the inverter frequency.
Setting range: 0.00 Hz–P00.03 (Max. output
frequency)
50.00Hz
○
P00.11
Acceleration
time 1
Acceleration time is the time needed for
accelerating from 0Hz to Max. output frequency
(P00.03).
Deceleration time is the time needed from
decelerating from Max. output frequency (P00.03)
to 0Hz.
S1 series inverter defines four groups of
acceleration and deceleration time, which can be
selected via multi-function digital input terminals
(P05 group). The acceleration/deceleration time
of the inverter is the first group by default.
Setting range of P00.11 and P00.12: 0.0–3600.0s
Depend
on
model
○
P00.12
Deceleration
time 1
Depend
on
model
○
P00.13
Running direction
0: Run in default direction
1: Run in reverse direction
2: Reverse running is prohibited
0
○