Hitachi SH1-007H

4-13
Chapter 4
For parameter configuration
[AC-30] to [AC-88]
Individual Accel/Decel time for Multi-speed
Code/Name
Range (unit)
Unit value
AC-30 Accel. time for Multi-speed 1
0.00 to
3600.00(s)
0.00
AC-32 Decel. time for Multi-speed 1
0.00
AC-34 Accel. time for Multi-speed 2
0.00
AC-36 Decel. time for Multi-speed 2
0.00
AC-38 Accel. time for Multi-speed 3
0.00
AC-40 Decel. time for Multi-speed 3
0.00
AC-42 Accel. time for Multi-speed 4
0.00
AC-44 Decel. time for Multi-speed 4
0.00
AC-46 Accel. time for Multi-speed 5
0.00
AC-48 Decel. time for Multi-speed 5
0.00
AC-50 Accel. time for Multi-speed 6
0.00
AC-52 Decel. time for Multi-speed 6
0.00
AC-54 Accel. time for Multi-speed 7
0.00
AC-56 Decel. time for Multi-speed 7
0.00
AC-58 Accel. time for Multi-speed 8
0.00
AC-60 Decel. time for Multi-speed 8
0.00
AC-62 Accel. time for Multi-speed 9
0.00
AC-64 Decel. time for Multi-speed 9
0.00
AC-66 Accel. time for Multi-speed 10
0.00
AC-68 Decel. time for Multi-speed 10
0.00
AC-70 Accel. time for Multi-speed 11
0.00
AC-72 Decel. time for Multi-speed 11
0.00
AC-74 Accel. time for Multi-speed 12
0.00
AC-76 Decel. time for Multi-speed 12
0.00
AC-78 Accel. time for Multi-speed 13
0.00
AC-80 Decel. time for Multi-speed 13
0.00
AC-82 Accel. time for Multi-speed 14
0.00
AC-84 Decel. time for Multi-speed 14
0.00
AC-86 Accel. time for Multi-speed 15
0.00
AC-88 Decel. time for Multi-speed 15
0.00
・Individual Accel/Decel times can be set for multispeed
functions[Ab-11] to [Ab-25].
[AC215] to [AC226], [Ad-01] to [Ad-42]
2nd motor When Intelligent Input terminal 024[SET] is enabled.
Code/Name
Range (unit)
Initial value
AC215 Accel/Decel change trigger,
2nd-motor
Same as AC115
AC216 Accel1 to Accel2 frequency
transition point, 2nd-motor
Same as AC116
AC217 Decel1 to Decel2 frequency
transition point, 2nd-motor
Same as AC117
AC220 Acceleration time 1, 2nd-motor
Same as AC120
AC222 Deceleration time 1, 2nd-motor
Same as AC122
AC224 Acceleration time 2, 2nd-motor
Same as AC124
AC226 Deceleration time 2, 2nd-motor
Same as AC126
Torque control function setting
Code/Name
Range (unit)
Initial
value
Ad-01 Torque reference input
source selection
01 to 13/15 *1)
07
Ad-02 Torque reference value
setting
-500.0 to 500.0(%)
0.0
Ad-03 Polarity selection for
torque reference
00(According to sign)/
01(Depending on the
operation direction)
00
Ad-04 Switching time of speed
control to torque control
0 to 1000(ms)
100
・The above parameters set the torque control operation.
・Torque control is enabled when input terminal 067[ATR]
torque control enabled is turned ON and control mode
[AA121] setting is set to 08 to 12 (sensorless vector
control or vector control with sensor).
For more information, contact your supplier or local
Hitachi inverter sales office.
Torque bias setting
Code/Name
Range (unit)
Initial
value
Ad-11 Torque bias input
source selection
01 to 13 /15 *1)
00
Ad-12
Torque bias value setting
-500.0 to 500.0(%)
0.0
Ad-13
Torque bias polarity
00(According to sign)/
01(Depend on the
operation direction)
00
Ad-14
Enable terminal [TBS]
00(Disable)/
01(Enable)
00
・For setting the torque bias.
For more information, contact your supplier or local
Hitachi inverter sales office.
Speed limitation for torque control
Code/Name
Range (unit)
Initial value
Ad-40 Speed limit input
source selection at torque control
01 to 13 *1)
07
Ad-41 Speed limit at torque
control (at Forward rotation)
0.00 to
590.00(Hz) *2)
0.00
Ad-42 Speed limit at torque
control (at Reverse rotation)
0.00
・The speed limit during the torque control can be set.
For more information, contact your supplier or local
Hitachi inverter sales office.
*1)00(Disable)/01(Terminal[Ai1])/02(Terminal[Ai2])/03(Terminal[Ai3])/
04(Terminal[Ai4])/05(Terminal[Ai5])/06(Terminal[Ai6])/07(Parameter
Setting)/08(RS485)/09(Option-1)/10(Option-2)/11(Option-3)/12(Puls
e train input(internal))/13(Pulse train input(option))/15(PID calc.)
Speed 2 [Ab-12]
Speed 3 [Ab-13],
Speed 4 [Ab-14]
Speed 1 [Ab-11]
Multispeed
FW
Speed 1
Speed
2
Speed
3
Speed
2
Speed
4
Speed
3
Speed
1
Speed 4
Accel/decel time
Accel. 1
[AC-30]
Accel. 2
[AC-34]
Accel. 3
[AC-38]
Decel. 3
[AC-40]
Accel. 4
[AC-42]
-
Decel. 3
[AC-40]
Accel. 4
[AC-42]
Decel. 4
[AC-44]
This will be effective only for Accel/Decel time if the
set frequency is the same.