English - 24 -
SETHEADPHONEOUTPUT Set headphone output
"#*set headphone output to n
or
#*Invalid Parameter"
GETHEADPHONEOUTPUT Get headphone output no parameter #*LINEOUT or #*HEADPHONE
GETDYNAMICBASS Get dynamic bass state. no parameter
#*the dynamic bass state is ...
GETBASSGAIN Get bass gain no parameter
"#*the bass gain level is n
Note: Above n is -6 <= n <= 6"
GETEQUSERFREQ
Get equalizer user freq.
"#*the equalizer value for the
band is n
or
#*Incorrect sound system
parameter entered
Note: Above n is -13 < n < 13"
GETEQMODE Get equalizer mode no parameter
"#*the equalizer mode is n
User"
SOUNDRESET Reset sound settings no parameter
"#*Fixed Volume is set to ...
#*Fixed volume availability is
set to ...
#*Headphone volume control
availability is set to ...
#*Start volume availability is set
to ...
#*Start volume limit is set to ...
#*Start headphone volume limit
is set to ...
#*Lower volume limit is set to ...
#*Upper volume limit is set to ...
#*Headphone volume limit is
set to ...
#*Wakeup time volume is set
to ...
#*All equalizer bands are set
to ...
#*Volume is set to ...
#*Headphone volume is set to ...
#*Headphone balance is set to ...
#*Headphone bass is set to ...
#*Headphone treble is set to ...
#*Digital audio out is set to ...
#*Audio output description path
is set to ...
#*Audio description is ...
#*Audio description relative
volume is set to ...
#*Audio description language is
set to ...
#*Sound Loudness is set to ...
#*Sound mode digital is set to ...
#*Sound mode is set to ...
#*Sound subwoofer is set to ...
#*SPDIF out is ...
#*DTS is ...
#*Bass gain is set to .. or
#*Dynamic bass is ...
"
To Next Page
Loading...
