Hitachi VSP E590 - Step 5: Power on the Storage System

Number Item Description
1 LAN board Networking board
2 LAN1 Connects to maintenance PC
3 LAN2 Connects to user's network
4 Uninterruptible power supply port Not used.
2. Connect the other end of the cable to a management console.
Step 5: Power on the storage system
After connecting the management console to the storage system, you can power on the storage system.
Procedure
https://knowledge.hitachivantara.com/Documents/Storage/VSP_E_Series/93-04-0x/Installation/Installing_your_VSP_E590_an…
Updated: Thu, 06 Jan 2022 00:49:25 GMT
Powered by
6