Step
Operation
overview
Description Executed command
<threshold_1>
[<threshold_2>]]
13 Creating LDEV
(V-VOL)
Specify pool and create an
LDEV(V-VOL).
raidcom add ldev -pool
{<pool ID#> |
<pool naming> | snap}
-ldev_id <ldev#>
{-capacity <size> |
-offset_capacity <size>
| -cylinder <size>}
[-emulation <emulation
type>][-location <lba>]
[-mp_blade_id <mp#>]
14 Creating LDEV
(V-VOL)
nickname
(arbitrary)
Create nickname for the
created LDEV.
This operation is arbitrary.
raidcom modify ldev
-ldev_id <ldev#>
-ldev_name <ldev naming>
15 Setting MP
blade of LDEV
(V-VOL)
Set MP blade of created LDEV
(V-VOL).
raidcom modify ldev
-ldev_id <ldev#>
-mp_blade_id <mp#>
16 Displaying
LDEV
information (V-
VOL)
Display information of created
LDEV (V-VOL) and confirm the
result of executing the
command.
raidcom get ldev -ldev_id
<ldev#> … [-cnt <count>]
[-key <keyword>]
17 Creating LU
path
Specify port, map LDEV to LUN
and create an LU path.
raidcom add lun -port
<port#> [host group name]
-ldev_id <ldev#>
[-lun_id <lun#>]
18 Displaying LU
path
information
Display LU path information
and confirm the result of
executing the command.
raidcom get lun -port
<port#> [<host group
name>]
Script examples
The following shows script examples of virtual volume (Dynamic Provisioning)
operation.
5-28
Provisioning operations with CCI
Command Control Interface User and Reference Guide
To Next Page
Loading...
