Table 5-7 Server Priority Manager operations when an LDEV and a WWN or iSCSI name
of an HBA is specified
Ste
p
Operation
overview
Description Executed command
1 Setting SPM
information for an
LDEV and a WWN or
iSCSI name
Specify the LDEV number, and the
WWN or iSCSI name of the host bus
adapter to set the priority
(prioritized or non-prioritized) as
the SPM target.
To set the non-prioritized option,
set the upper limit as well.
Normally, set the prioritized option
in step 1, and check the monitoring
information in step 3. And then, if
necessary, change the priority to
non-priority in step 4, and set the
upper limit.
raidcom modify spm_ldev -ldev_id
<ldev#> {-hba_wwn <wwn strings> |
-hba_iscsi_name <initiator iscsi
name>} [ -spm_priority <y/n>] [{-
limit_io | -limit_kb | -limit_mb}
<value> ]
2 Checking SPM
information
Display the setting status of SPM.
raidcom get spm_ldev [-ldev_id
<ldev#> | -hba_wwn <wwn strings>
| -hba_iscsi_name <initiator
iscsi name> ]
3 Displaying
monitoring
information of the
prioritized or non-
prioritized WWN
Display monitoring information.
raidcom monitor spm_ldev -ldev_id
<ldev#> {-hba_wwn <wwn strings> |
-hba_iscsi_name <initiator iscsi
name>}
4 Changing the upper
limit of the prioritized
and non-prioritized
WWNs
If necessary, determine the priority
and the upper limit based on the
monitoring information, and then
change the priority.
When the non-prioritized option is
set, set the upper limit as well.
raidcom modify spm_ldev -ldev_id
<ldev#> {-hba_wwn <wwn strings>
| -hba_iscsi_name <initiator
iscsi name>} [-spm_priority <y/
n>] [{-limit_io | -limit_kb | -
limit_mb} <value>]
5 Deleting from the
SPM target
Specify the LDEV number and the
WWN or iSCSI name of the host bus
adapter to delete them from the
SPM target.
raidcom delete spm_ldev -ldev_id
<ldev#> {-hba_wwn <wwn strings>
| -hba_iscsi_name <initiator iscsi
name>}
Virtual storage machine operations
• Creating host groups in a virtual storage machine on page 5-68
• Adding LDEVs to a virtual storage machine on page 5-69
• Removing the virtual storage machine on page 5-70
Creating host groups in a virtual storage machine
Use the following provisioning operations to create host groups in a virtual
storage machine and to assign virtualized LDEV to LU.
5-68
Provisioning operations with CCI
Command Control Interface User and Reference Guide
To Next Page
Loading...
Need help?
General