raidcom initialize ldev
Error message
Executing/
Async
Error code
Description
SSB1 SSB2
Get Command
Status
Async 2E11 6004 The operation of Dynamic Provisioning V-VOL
cannot be performed because there is a blocked
pool.
Get Command
Status
Async 2E11 6006 The operation of Dynamic Provisioning V-VOL
cannot be performed because there is a blocked
pool volume.
Get Command
Status
Async 2E11 8004 The operation cannot be performed because the
internal processing is in progress.
Get Command
Status
Async 2E11 8010 The operation cannot be performed because the
internal processing is in progress.
CMDRJE Executing 2E11 9400 The command cannot be accepted. After a while,
execute the same command.
Get Command
Status
Async 2E14 0000 The processing stopped because aborting
processing is required.
CMDRJE Executing 2E20 0000 LDEV is not installed.
CMDRJE Executing 2E21 9011 The program product is not installed.
Get Command
Status
Async 2E22 0100 The quick format cannot be performed because the
total number of parity groups in which the LDEVs in
quick formatting or the LDEVs blocked while quick
formatting are implemented exceeds the maximum
number that can be performed at the same time.
Get Command
Status
Async 2E30 000A The specified LDEV is used for a Dynamic
Provisioning.
Get Command
Status
Async 2E30 000C The specified LDEV is used as a quorum disk.
CMDRJE
Get Command
Status
Executing/
Async
2E30 000E The specified LDEV is used as a pool volume.
Get Command
Status
Async 2E30 000F The specified LDEV is used as a journal volume.
Get Command
Status
Async 2E30 001A Volume Security is set to the specified LDEV.
Get Command
Status
Async 2E30 002D Quick format cannot be performed because the
target LDEV is not an internal volume.
Get Command
Status
Async 2E30 004E The specified LDEV is a Data Retention Utility/
Volume Retention Manager attribute device.
Get Command
Status
Async 2E30 0061 The specified LDEV is a pool volume and the pool
volume include the Dynamic Provisioning volume
that is not in the blocked status.
Troubleshooting
9-55
Command Control Interface User and Reference Guide
To Next Page
Loading...
