OPERATING THE MACHINE
5-28
Emergency Boom Lowering Procedure
d
WARNING: Prevent personal injury. Confirm that no
one is under the front attachment before starting the
procedure below.
If the engine stalls and cannot be restarted, lower the boom
tolowerthebuckettothegroundreferringtotheemergency
boom lowering procedure stated below.
1. Removethecoverabovethehydraulicoiltank.Loosen
fillercap(1)onthehydraulicoiltanktoreleaseair
pressurefromthehydraulicoiltank.
d
WARNING: Be sure to work only after oil temperature
is low or before operation. Failure to do so may allow
high temperature oil to spray, possibly causing severe
burns.
2. Removebolts(2)fromthefrontandleftsideofcover(3)
toremovecover(3).
3. Lowertheboomintheproceduresonthenextpage.
ZX30U-5N,35U-5N
ZX50U-5N,60USB-5N
1
3
2
1
MADB-00-017
MADB-00-018
MADB-05-005