MAINTENANCE
7-4
MAINTENANCE GUIDE TABLE
The maintenance guide table is affixed to the reverse side
of the tool box cover. Lubricate and/or service the parts at
the intervals as instructed in the table so that all necessary
maintenance can be performed regularly.
• Symbol Marks
The following marks are used in the maintenance guide
table.
Grease
(Front Joint Pin, Swing Bearing, Swing
Gear)
Hydraulic Oil Filter
(Pilot Filter, Swing Drain Filter,
Hydraulic Oil Tank Filter, Suction Filter)
Gear Oil
(Travel Reduction Device, Swing Re-
duction Device)
Air Cleaner Element
Engine Oil
Coolant
(Long-Life Coolant)
Engine Oil Filter
Fuel Filter
(Fuel Filter Cartridge)
Hydraulic Oil
To Next Page