HITEC flash 4 sistem x User Manual

5 Model Memory and 3 Pre-set Mixes
3 Model Flight Modes and Auto Save Feature
4/5 Channel Programmable Radio Control System
Operational Manual

HITEC flash 4 sistem x Specifications

General

Brand	HITEC
Model	flash 4 sistem x
Category	Remote Control
Language	English

Summary

Programming Your System X Radio

Model Selection

Procedure to select and save up to five different aircraft models into the transmitter's memory.

Initial Mode Programming

Guide to setting up basic transmitter functions and aircraft modes before main programming.

Aircraft Mode Change

How to select between ACRO, GLID, or GLIDACRO modes to tailor the radio for different aircraft types.

Stick Mode Change

Countdown Timer Feature

Mixing Functions, Elevon and V-tail

Data Reset Feature

Initial Mode Programming Review

Main Edit Mode Programming

End Point Adjustment

How to set maximum servo travel for control surfaces to prevent damage and optimize response.

Exponential Rate Adjustment

How to adjust control response curves for finer control near neutral and quicker response at stick extremes.

Dual Rate Adjustment

How to set up two different servo travel rates for ailerons and elevators, switchable in flight.

Servo Reversing

How to reverse servo direction if installed incorrectly or operates opposite to the command.

GLIDACRO FLP 1 and GLID FLP 2

Aileron / Rudder Mixing

GLID Mode or Glider Mode Programming's Supplement

GLID ACRO Mode or Combination Aerobatic Glider Supplement