HITEC flash 5 sistem x - User Manual

5 Model Memory and 3 Pre-set Mixes
3 Model Flight Modes and Auto Save Feature
4/5 Channel Programmable Radio Control System
Operational Manual

HITEC flash 5 sistem x Specifications

General

Brand	HITEC
Model	flash 5 sistem x
Category	Remote Control
Language	English

Summary

Programming Your System X Radio System

Selecting and Managing Flight Models

Procedure for selecting and storing up to five different flight models into memory.

Initial Mode Programming Setup

How to access and configure the INITIAL MODE menu for aircraft and transmitter settings.

Changing Aircraft Flight Modes

Adjusting Transmitter Stick Modes

Activating Elevon and V-tail Mixing

Main Edit Mode Servo Adjustments

End Point Adjustment (EPA) for Servo Travel

How to set servo travel limits (EPA) to prevent damage and fine-tune movement.

Exponential Rate Adjustment for Control Response

How to adjust the control response curve for finer, more precise maneuvers.

Dual Rate Adjustment for Flight Control Versatility

How to set alternative servo travel rates for different flying conditions using switches.

Servo Direction Reversing

How to reverse servo rotation direction without physically altering installation.

GLIDACRO FLP 1 and GLID FLP 2 Programming

Aileron to Rudder Mixing Configuration

How to implement Aileron/Rudder mixing for smooth, coordinated turns.

Glider Mode Specific Programming Supplements

GLID ACRO Mode Aerobatic Glider Supplements