HITEC Flash 7 User Manual

7 Channel 2.4 GHz Aircraft Computer Radio System
7 Channel 2.4 GHz Aircraft Computer Radio System
OPERATION MANUAL ver. 1.0
7 Channel 2.4 GHz Aircraft Computer Radio System

HITEC Flash 7 Specifications

General

Brand	HITEC
Model	Flash 7
Category	Remote Control
Language	English

Summary

Safety Information

Safe Flying and Radio Operation Guidelines

Provides essential guidelines for safe flight and radio system usage.

Receiver Link (Binding)

Procedure for Linking Receivers

Step-by-step guide for binding receivers to the transmitter.

FAIL-SAFE and Hold Mode Setup

Configuring and Testing Fail-Safe

Explains how to set up, test, and disable the FAIL-SAFE function.

Range Check Function

Performing Pre-Flight Range Checks

Instructions on how to perform a crucial pre-flight range check.

System Menu Programming

Overview of System Functions

Introduces the System Menu and lists its primary functions and settings.

Model Select Menu

Managing Model Memories

Covers creating, selecting, copying, resetting, deleting, and renaming models.

Channel Selection Menu

Assigning Channels and Controls

Explains how to assign transmitter controls to specific channels and functions.

Dual Rates and Exponentials

Configuring Control Throw and Sensitivity

Details setting dual rates and exponential values for control surfaces.

Programmable Mixes

Creating Custom Servo Mixes

Allows configuration of user-defined mixes for advanced control.

Acro and Glider Programming

Fixed-Wing Specific Functions

Introduces programming options specific to ACRO and GLID aircraft types.

Flight Conditions Setup

Configuring Flight Modes for Aircraft

Allows programming up to four flight conditions with custom trim and mix settings.

Gyro Setup

Configuring Gyro Sensitivity and Modes

Sets up gyro gain and sensitivity for tail rotor stabilization.

Throttle Cut (Acro Only)

Configuring Engine Kill Switch

Sets up a kill switch for glow/gas engines to idle or shut down.