HITEC Flash 7 User Manual

7 Channel 2.4 GHz Aircraft Computer Radio System
7 Channel 2.4 GHz Aircraft Computer Radio System
Section 6: Heli Programming Menu
93
Throttle Curve cont.
11. Press the back button to return to the model function menu.
To disable the throttle curve:
1. Scroll to highlight the “MIX” eld in the throttle curve menu
and press the jog dial to activate the menu.
2. Select “INH” (inhibit) and press the jog dial to conrm your
selection.
3. Press the Back button to return to the model function menu.
- Scroll to the ight condition eld and press the jog dial to
activate the menu.
- Choose the desired ight condition and press the jog dial to
conrm your selection.
You may also select a ight condition in this menu by activating the desired ight condition.
Note
TipTip
Tip
Caution
Pitch Curve
The Pitch Curve function allows you to modify the normally-linear servo rate movement for collective
pitch by dening ve dierent points along the pitch response curve. It is necessary to manipulate
the pitch curve in conjunction with the throttle curve to achieve maximum performance from your
helicopter.
To congure a pitch curve:
1. From the model menu, rotate the jog dial to highlight
“P.Curve” and press the jog dial once to enter the activation
menu.
2. Press the jog dial again to activate the menu.
3. Rotate the jog dial to select ACT (activate), then press the jog
dial to conrm your selection and activate the pitch curve
menu.
4. Scroll to the “1” eld and press the jog button to activate the
menu.

HITEC Flash 7 Specifications

General

Brand	HITEC
Model	Flash 7
Category	Remote Control
Language	English