HITEC Flash 7 User Manual

7 Channel 2.4 GHz Aircraft Computer Radio System
7 Channel 2.4 GHz Aircraft Computer Radio System
Section 1: Introduction
17
2.4GHz 6 Channel
Aircraft Receiver
OPTIMA
MINIMA (MAXIMA)
2.4GHz 6 Channel
Aircraft Receiver
Optima and Minima Series Receiver Link (ID-Setting or Bind)
Your Hitec AFHSS system uses a communication protocol that links and binds the Hitec 2.4GHz receiver to
your transmitter. Once the receiver and transmitter are “bound”, no other transmitter can interfere.
Turn on the transmitter and select “Yes” to the “Ready to Transmit” prompt by
pressing the jog dial.
Press the jog dial and back button simultaneously to enter the System
Menu list. From here scroll to the SPECTRA function and press the jog
dial to enter the Spectra setup menu.
Press the jog dial to
activate the receiver
selection and scroll
to the “Opti&Mini”
receiver.
Back at the receiver
selection screen, scroll
to BINDING and press
the jog dial to enter
the binding screen.
Select the type of receiver
you are using, either
Optima or Minima, and
push the jog dial to
conrm your selection.
Press the jog dial to save your
setting. When prompted to
change the receiver type select
“Yes” and press the jog dial to
conrm your choice.
Select “Yes” for binding.
Press and hold the link button on the Receiver and turn on the power.
Release the link button. Release the Link button, both RED and
BLUE LEDs will be blinking rapidly to
nd the transmitter’s signal.

HITEC Flash 7 Specifications

General

Brand	HITEC
Model	Flash 7
Category	Remote Control
Language	English