HITEC X2 Ultima - Maximum Circuit Power Chart

Battery
Type
The actual amount of charge current feeding to the battery is automatically limited
to 200 watts each, so as not to exceed the charger's maximum rated charging
power. The maximum discharge power is approximately 25 watts. The discharge
current delivered to the charger is limited by the charger's internal thermal sensor
for maximum discharge current. If the internal temperature goes over 80° Celsius,
the charger will be cut off and the "TEMP OVER ERR" will show on the LCD. In this
case, please decrease the discharge current. Please refer to the following chart for
the maximum charging/discharging current.
Maximum circuit power chart (Output 1 & 2)
MAXIMUM CIRCUIT POWER CHART
28