Hive Active Heating - Getting Started; Heating; How to Change the Temperature; How to Change Mode

Heating
How to change mode:
Your thermostat has 3 different heating modes: Schedule, Manual and Off
1
Push the dial to wake up the thermostat.
2
Once the screen turns on press the Menu button and select Heat.
3
Here you’ll see the different modes: Schedule, Manual andOff.
4
Select one by turning and pushing the dial.
Schedule turns your heating on and off when you want it to and can
be more energy efficient.
Manual makes sure your home maintains a constant temperature.
Off leaves your heating in Frost Protection – so your heating will only
come on if your home drops below 7°C. You’ll see on the screen
to remind you that Frost Protection is enabled.
Getting started
How to change the temperature:
1
Turn the dial clockwise toincrease the target temperature.
2
Your heating will come on if the target temperature is above
the actual temperature.
3
Turn the dial anti-clockwise to lower the target temperature.
16˚20˚
MON 19:25
TARGET ACTUAL
ON
MANUAL
43