25
3. LAP4G use guide :
Align key with knob (Fig. 1)，to turn left enables the actuator；to turn right disables the actuator.
Warning : Please stop turning while the key applied to the knob rotates about 45°， otherwise，the key will be
damaged；the same situation in the opposite direction. Fig. 2. is a reference angle.
4. When the extension tube travels to the end limit, the operation of an actuator will automatically stop (This
function is suitable for LAS1, LAS2, LAS3, LAS4, LAM3, LAN1, LAN3A, LAN5 ,LAC1 series only).
5. For LAM1 and LAN2 series, the operation of an actuator will stop when the extension tube travels to the
external limit. (LAK2LR with a function of controlling external limit is adopted to cooperate with LAM1 series.)
6. One feature of our controller is to equip over current protector; when an actuator encounters an unknown
obstacle during the operation or stops because of overload , a controller will automatically stop from the danger.
If this situation repeats many times, please ensure this system is correctly installed and the load is within the
regulation range. If problems still remain, please inform our agent or distributor.
To Next Page
Loading...