3
Important Notes:
1. Please carefully read this operation manual before using this product. We don't take responsibility for any damage,
accident or injury possibly caused by those who didn't follow these notes to install.
2. Don't disassemble or reinstall this product yourself. Since this product is designed under structural operation,
computer simulation or physical test, it can't be disassembled or reinstalled without specialist's permission. If there is
any accident or damage caused by self disassembly or reinstallation, we will not take responsibility.
3. If the appearance is damaged before installing or using, please immediately contact us or an agent.
4. Ensure to read product label or performance specifications indicated by the delivery document before installing linear
actuators.
5. Carefully read power supply indicated on the specification label of a control box before using this product.
Moreover, confirm the supplied power complies with product requirement. If there is product damage or personnel
injury caused by wrong supplied power, we will not take responsibility.
6. Don't use this product under an environment over the rating load. If there is any damage or injury, we will not take
responsibility.
7. Don't use this product under an impact environment. If there is product damage, accident or injury, we will not take
responsibility.
8. Don't handle this product yourself if faults occur. This product can be repaired by our qualified technicians only.
9. This appliance is not intended for use by persons (including children) with reduced physical, sensory or mental
capabilities, or lack of experience and knowledge, unless they have been given supervision or instruction concerning
use of the appliance by a person responsible for their safety.
10. Children should be supervised to ensure that they do not play with the appliance.
11. Do not pull the power cable with excessive force when moving the product.
One-year guarantee is provided since the date this product delivered. For product damage caused by the improper
operations (Please refer to notes and installations in this operation manual.) or natural disasters during this period, we
will not take responsibility to replace and maintain them for free.
Operating Safety Regulation:
1. While operating an actuator, don't interrupt the motor operation to avoid failures in motor or mechanical structure.
2. Please follow the directions and use the nominal voltage of actuator motor with DC voltage. The supplied DC voltage
can provide the maximum current at the maximum load.
3. If customers use power supplies and controllers themselves, please follow the current allowed for wire cross-section to
install over current protectors (such as fuse), on the output end of power supplier or the input end of actuator power and
use this over current signal to control actuators, which not only stop movement or disconnect power supply but also
ensure the extension tube of an actuator at the limit position or under the overload operation can disconnect the power
and provide appropriate control and protection.
4. Unless specially customized, the duty cycle of our actuator should be 10%. The duty cycle is defined to continuously
operate 2 minutes and pause 18 minutes. If customers operate over duty cycle (10%), please install overheat detection
and prevention devices (as a fan) and use this overheat detection signal to control actuators to stop movement or
disconnect power supply according to control requirements.
To Next Page
Loading...
Need help?
General
