HoBao Pro Hyper ST - User Manual

Essential radio control components for the RC car operation.

Necessary items for initiating the engine.

Tools suggested for assembly and maintenance tasks.

Components provided within the product package.

Steps for assembling the central differential mechanism.

Instructions for assembling the main gearbox components.

Process of attaching the front differential to the chassis.

Mounting the front body post structure.

Step-by-step guide for assembling the steering knuckle.

Instructions for attaching front suspension arms.

Mounting the front upper plate assembly.

Attaching the steering servo saver arms.

Installing the front stabilizer components.

Final assembly steps for the front stabilizer.

Steps for assembling the steering rod.

Further steps for steering rod assembly.

Instructions for assembling the rear gearbox.

Mounting the rear brace supporter.

Steps for assembling the rear shock stay.

Attaching the rear gearbox to the chassis.

Installing the rear universal joint shaft.

Attaching the rear suspension arms.

Steps for assembling the rear stabilizer.

Further steps for rear stabilizer assembly.

Mounting the center differential plate.

Installing the air filter supporter.

Attaching the front brace.

Mounting the wing stay.

Installing the rear brace.

Process of mounting the engine.

Second stage of clutch assembly.

Securing the engine to the chassis.

Steps for assembling the fuel tank.

Mounting the fuel tank onto the chassis.

Connecting the fuel tubes.

Building the radio tray assembly.

Important notices and warnings.

Installing the switch into the receiver box.

Connecting the steering servo rod.

Attaching throttle linkage to the lever.

Connecting brake linkage to the brake lever.

Mounting the air filter onto the engine.

Installing the side guards.

Second stage of rear shock assembly.

Final shock assembly steps.

Attaching front and rear shock springs.

Assembling the front shock absorber unit.

Steps for assembling wheels and tires.

Mounting tires onto front knuckles.

Attaching the rear wing.

Indicates positions for drilling on the body shell.

Final steps for mounting the body shell.

Parameters for front camber, toe angle, shocks, arms, and steering.

Parameters for rear camber, toe angle, shocks, arms, and servo rod.

Tuning front camber, toe, shocks, and arms.

Tuning rear camber, toe, shocks, and arms.