HoBao Pro Hyper ST - 62 Assembly of Front Shocks-Step-1; 63 Assembly of Rear Shocks-Step-2; 64 Assembly of Front and Rear Shocks-Step-3

Fit into groove.Fit into groove.
Fit into groove.Fit into groove.
Shock Oi
lShock Oi
l
NO Bubbles
Pull down the pistion.
Move the shaft up
and down slowly to
remove bubbles.
Check if piston
moves smoothly
X2
FOR REAR
LONG
X2
FOR FRONT
SHORT
87398 x2
C-clips
87398 x4
O-ring
87125 x2
2.6x6.5x0.6mm
washer
87125 x2
2.6mm
Nylon nut
87398 x4
Shock collar
87398 x2
C-clips
87398 x4
O-ring
87126 x2
2.6x6.5x0.6mm
washer
87126 x2
2.6mm
Nylon nut
87398 x4
Shock collar
86048 x2
Shock pision
2.6x6.5x0.6mm
2.6mm
87016 x2
Ball
86050 x2
Shock ball end
86045 x2
Shock body
87125 x2
3.5mm
front shock shaft-standard
87016 x2
6.8mm
Ball
86048 x2
Shock pision
2.6mm
2.6x6.5xmm
86046 x2
Shock body
87126 x2
3.5mm
Rear shock shaft-standard
86050 x2
Shock ball end
86049 x4
Oil seal
86045 x2
86046 x2
Shock cap
86050 x4
Shock ball head
1
2
62
63
64
Assembly of Front and Rear Shocks-Step-3
Assembly of Rear Shocks-Step-2
Assembly of Front Shocks-Step-1
1
2
3
1
2
1
2
1
2
3
1
2
1
2
3
X2
X2
23