– 3 –
© HOBART, 2004
Installation, Operation, and Care of
MODEL 2812 & 2912 SLICERS
MODEL 2812PS SLICER with Portion Scale
SAVE THESE INSTRUCTIONS
GENERAL
The model 2812, 2812PS and 2912 slicers are equipped with a
1
/2 HP motor and are available for single-
phase electrical service. The slicer features the exclusive Hobart CleanCut
TM
blade. The slicer is
furnished with a cord and plug as standard equipment. Other features and options include:
The Power Interrupt feature, standard, requires the slicer to be manually re-started after a power
interruption.
The Gauge Plate and Carriage Interlock feature, standard, prevents the Carriage Tray from being
removed unless the Carriage is in the H
OME position (pulled all the way to the front) and the Gauge
Plate is C
LOSED. When the Carriage Tray is tilted horizontally, the slicer will turn OFF if it has not
previously been turned O
FF. Once the Carriage Tray is tilted horizontally or removed, the slicer cannot
be started and the Gauge Plate cannot be opened until the Carriage Tray is returned to its normal
operating position.
The Home Start feature, standard, requires the carriage to be in the H
OME position before the slicer
can be started.
The Auto Shutoff feature, standard, will shutoff the slicer if a full stroke of the carriage has not been
made within a 10 second interval.
The 2912 slicer features automatic slicing with six adjustable speeds.
The 2812PS Slicer with Portion Scale displays the weight or slice count as the sliced product falls to
the platter. Four preset values (P1 thru P4) can be programmed with weight or slice count and are
readily accessed for portioning. A memory register (M) allows any current weight or key entered weight
or slice count to be used for portioning. The scale display can Tare to indicate Net weight but is
NOT
LEGAL
FOR TRADE
.
A tubular food chute, 4" leg set and product tray are other available accessories for 2812, 2812PS and
2912. The low carriage fence is an accessory on 2812 & 2812PS; it is standard on 2912. A heavy meat
grip is an available accessory.
Model 2812 Slicer Model 2912 SlicerModel 2812PS Slicer
To Next Page
Loading...
Need help?
General
