– 4 –
Fig. 2
OPERATION
SAFETY
SAFETY DEVICES INCORPORATED IN THIS SLICER MUST BE IN THEIR CORRECT OPERATING
POSITIONS ANYTIME THE SLICER IS IN USE.
The T
OP KNIFE COVER must be in position and secured with the LATCH KNOB (Fig. 2). The RING GUARD
is not removable. The DEFLECTOR, mounted below the slicer knife, can be removed for cleaning.
The M
EAT GRIP (Fig. 2) must be used when slicing short ends to keep your hand(s) away from the
knife.
When the slicer is not running, the I
NDEX KNOB (Fig. 2) must be turned back below zero (fully
clockwise). The G
AUGE PLATE will then cover the knife edge.
Always UNPLUG the P
OWER CORD before cleaning or moving the Slicer.
WARNING: ROTATING KNIFE. USE FEED GRIP. UNPLUG MACHINE POWER CORD BEFORE
CLEANING, SERVICING, OR REMOVING PARTS. REPLACE PARTS BEFORE USE.
Model 2912
PL-41482-1
SWITCH KNOB
SPEED SELECTOR KNOB
LEVER IN MANUAL (DOWN) POSITION
GAUGE PLATE
TOP KNIFE
COVER
SHARPENER
INDEX KNOB
CARRIAGE HANDLE
MEAT GRIP
RETAINING CLIP
LATCH KNOB
CARRIAGE TRAY
PRODUCT SHIELD
To Next Page
Loading...
