6
3.8 LIABILITY
Installations and repairs which are not carried out by Authorised technicians or the
use of other then original spare parts, and any technical alterations to the machine,
may affect the warranty set out in the standard conditions of sale.
4. GENERAL MIXER DESCRIPTION.
The mixer is designed to mix food products as detailed in the mixing charts. The
mixer is designed as a bench mounted machine. The mixer is manufactured from a
cast iron pedestal, transmission case and bowl support. All cast iron components are
finished with a durable metallic steel grey paint. The agitators are either aluminium or
stainless steel. The mixing bowl is manufactured from corrosion resistant stainless
steel. The mixer is fitted with a ‘no volt release’ safety feature to prevent automatic
restarting after a supply failure, disconnection from the mains or operation of one of
the interlock devices. The bowl support has an electrical interlocked so that when the
bowl support is in the down position the machine will not work. The guard has an
electrical interlock to prevent the mixer operating if the guard is not in the closed
position. The mixer has a 15 minute time with continuous run position.
4.1 FEATURES AND BENEFITS.
• World-renowned mixer design.
• High grade stainless steel mixing bowl
• 3 speed gear box.
• Durable stainless steel splash back and guard
• Optional attachment hub.
• No volt release control circuit.
• Timer fitted as standard.
• Guard and bowl support interlock system.
• Removable guard
•
Easy wipe down surfaces
•
Reduced capacity bowl available.
•
Optional splash shield available.
•
Optional bowl scraper available
• Mobile and static stands available.
5 USING FOR THE MIXER FOR THE FIRST TIME.
Refer to figure 1 for mixer component identification.
• Before using for the first time, thoroughly clean the bowl and agitator, as
described in section 10; Cleaning
• Ensure that the mixer is switched off (1)
• Ensure the cover (11) is fitted to the hub (where applicable) if an attachment is
not in use.
• Always remove any attachment before using the agitator.
• Lower the bowl support by rotating the bowl handle downwards (3)
• Rotate the front guard cage assembly (10) to the open position
To Next Page
Loading...
