Hobart CNA - Technical Data and Machine Documents; Model-Specific Technical Data; Machine Documentation Storage

Page 4 – CNA Series (rev. 3.00) © HOBART GmbH, Service Training Center
SERVICE TRAINING CENTER
TECHNICAL DATA
MODEL CNA CNA-E CNA-L CNA-S CNA-C
Capacity (racks - plates / hour)
standard 120 - 2160 150 - 2700 180 - 3240 220 - 3960 180 - 3240
accordant DIN0510 80 100 120 150 120
Prewash
Pump load (kW) – 0.3 1.1 1.5 1.1
Delivery rate (l/min) – 250 740 1020 740
Tank volume (l) – 30 54 100 54
Wash
Pump load (kW) 1.5 1.5 1.5 1.5 1.5
Delivery rate (l/min) 1020 1020 1020 1020 1020
Tank volume (l) 100 100 100 100 100
Rinse
Water consumption (l / hour) 260 260 260 260 260
Dryer
Heating (kW) 4.5 / 9 4.5 / 9 4.5 / 9 4.5 / 9 4.5 / 9
Air circulation (m-/h) 1800 1800 1800 1800 1800
Fan motor (kW) 0.42 0.42 0.42 0.42 0.42
Equipment
2 speeds yes yes yes yes yes
Auto-timer Option Option Option Option Option
Isolating switch Option Option Option Option Option
Dual rinse yes yes yes yes yes
Tr iple rinse Option Option Option Option Option
Heat recovery C30 Option Option Option Option Option
Heat pump CHP18 Option Option Option Option Option
MACHINE DOCUMENTS
Wiring diagrams and general machine data are stored
in a pocket at the rear of the hinged electric box.