Need help?Do you have a question about the Hobart FT1000 and is the answer not in the manual?
General| Brand | Hobart |
|---|---|
| Model | FT1000 |
| Category | Dishwasher |
| Language | English |
Steps to ensure all components are in proper operating positions before starting the machine.
Instructions for opening supply valves and turning on electric supply for tank filling.
How to start and stop the conveyor, pumps, and blower dryer.
Procedure for emptying strainer baskets to maintain dishwasher operation.
Guidelines for pre-scraping and loading dishes onto the conveyor.
How to remove dishes from the conveyor after washing.
Information on monitoring and maintaining water temperatures.
How to adjust conveyor speed based on ware type.
Step-by-step guide for manually deliming the machine.
How to clean the ASR system components.
Procedure for initiating and performing the automatic cleaning cycle.
Steps to initiate and perform the automatic deliming cycle.
Key recommendations for proper use and care of the dishwasher.
Diagram and legend for curtain placement in 8' center sections.
Diagram and legend for curtain placement in 5' center sections.
Explanation of how security levels affect machine operation and programming.
Basic security level, default setting, and its limitations.
Security level enabling advanced features and access.
Highest security level requiring a Manager Code for full access.
How to navigate menus and perform customizations using control panel.
Explanation of menu navigation keys and prompts.
Step-by-step guide to access the Manager menu with security code.
Information displayed on the About screen.
Options available in the Actions menu, like changing codes or reverse jog.
Options in the Logs menu for viewing delime counter, errors, and statistics.
Overview of the Parameters Menu and its purpose.
Table detailing parameters, descriptions, values, defaults, and security levels.
Cleaning instructions for line strainers.
Information on obtaining lubricants and general lubrication advice.
Maintenance requirements for motors.
Procedure for checking and maintaining conveyor gearmotor oil level.
Instructions for inspecting and lubricating the conveyor drive chain.
Lubrication procedure for conveyor take-up unit adjusting screws.
To Next Page
