Need help?Do you have a question about the Hobart FX-20 and is the answer not in the manual?
General| Brand | Hobart |
|---|---|
| Model | FX-20 |
| Category | Dishwasher |
| Language | English |
Proper placement, leveling, and securing the machine.
Requirements for authorized technicians and national/local codes.
Connection details for water supply, pressure, and shut-off valve.
Details for water supply, pressure, and shut-off valve for FX-10/20 S.
Connecting the drain hose to the site drain line.
Explanation of the selector switch functions and programmes.
Steps to fill the rinse booster heater before initial use.
Process for filling the machine's main tank.
Running a test cycle to check operation.
Instructions for filling detergent and rinse agent containers.
How to adjust detergent and rinse agent dispenser quantities.
Instructions for filling detergent and rinse agent containers (prior June 1999).
How to adjust dispenser quantities (prior June 1999).
Setting the softener based on water hardness.
Procedure for regenerating the water softener.
Setting softener for water hardness (prior June 1999).
Procedure for regenerating water softener (prior June 1999).
Preparing the machine before operation, checking levels and connections.
How to properly load dishes into the racks.
Steps for selecting a programme and starting the wash cycle.
Daily cleaning procedures for the machine, including strainers.
Procedures for draining the machine to prevent frost damage.
Recommendation for service contracts for trouble-free operation.
Guide to identify and resolve common machine failures.
Proper placement, leveling, and securing the machine.
Instructions for converting the machine to a corner installation.
Requirements for authorized technicians and national/local codes.
Connection details for water supply, pressure, and shut-off valve.
Details for water supply, pressure, and shut-off valve for HX-30/40 S.
Connecting the drain hose to the site drain line.
UK specific water connection for HX-30/40 S, supply from storage.
Explanation of the selector switch functions and programmes for HX models.
Steps to fill the rinse booster heater before initial use.
Process for filling the machine's main tank.
Running a test cycle to check operation.
Instructions for filling detergent and rinse agent containers (March 2000 onwards).
How to adjust dispenser quantities (March 2000 onwards).
Instructions for filling detergent and rinse agent containers (prior March 2000).
How to adjust dispenser quantities (prior March 2000).
Setting the softener based on water hardness (March 2000 onwards).
Procedure for regenerating the water softener (March 2000 onwards).
Setting softener for water hardness (prior March 2000).
Procedure for regenerating water softener (prior March 2000).
Preparing the machine before operation, checking levels and connections.
How to properly load dishes into the racks.
Steps for selecting a programme and starting the wash cycle.
Daily cleaning procedures for the machine, including strainers.
Procedures for draining the machine to prevent frost damage.
Recommendation for service contracts for trouble-free operation.
Guide to identify and resolve common machine failures.
To Next Page
