Hobart FT1000 - Tank Filling Procedure

– 5 –
• Thedualrinseandnalrinsearmsmustbeproperlyinstalled(Figs.5&6).
Fig. 5 Fig. 6
• OnmachinesequippedwiththeASRsection,theASRarms,strainerpan,and
soilcollectorstandpipemustbeproperlyinstalled(Figs.7&8).
Fig. 7 Fig. 8
• Allcurtainsmustbeproperlyinstalledasshownonpages14-15ofthismanual.
• Alltankdrainsmustbeplacedintheclosedposition.
Masterdrain(onlymachinesequippedwithAutoCleanandAutoDelime)
mustbeplacedintheopenposition.
TANK FILLING
Allwater(andsteam,ifequipped)supplyvalvesmustbeopenedandtheelectric
supplyturnedonbeforethemachinewillfunction.
Closealldrainsanddoors.Thedrainhandlesarelocatedneartheooratthefront
ofeachtank.Swingdrainhandlestotherighttocloseandtothelefttoopen.(On
machinesequippedwithAutoCleanandAutoDelime,opentheMasterDrainlocated
ateithertheloadorunloadendoftheunit.SwingtheMasterDrainhandletothe
righttoopenandtothelefttoclose.)