Hobart FT1000 - OPERATION; Machine Preparation - Pre-Operation Checks

– 4 –
Operation and Care Of
FT1000 SERIES DISHWASHERS
SAVE THESE INSTRUCTIONS
OPERATION
MACHINE PREPARATION – CHECK BEFORE BEGINNING OPERATION
Openthemachinedoorsandmakesureallcomponentsareintheirproperoperating
positions before beginning operation.
• Allstrainerpansandscrapbasketsmustbeproperlyinstalledineachsection
(Fig.1).
Fig. 1
• Theexternalscrapbasket(s)mustbeproperlyinstalledbeneaththeloadofthe
machine(Fig.2).
Fig. 2
• Allupperandlowerwasharmsmustbeproperlyinstalledineachsection.Wash
armslidersmustalsobeplacedintheclosedposition(Figs.3&4).
Fig. 3 Fig. 4