Hobart FX series - Adjustment of Water Hardness; Cycle Counter; Water Consumption Counter

BA-21426-002-EN 06.08.2010 19
EN
8. SETTINGS AND COUNTER VALUES
8.3. ADJUSTMENT OF WATER HARDNESS
With optional softener only.
To adjust the softener to the local water hardness (obtain details from
local water authority.
– Push Program button
➁
again until
• the upper display
➅
shows “H04“.
– Push ON/OFF button
➀
repeatedly until the desired setting (H01-
H04) appears.
• H01 = up to 9°eh
• H02 = 10 to 18°eh
• H03 = 19 to 26°eh
• H04 = 27 to 38°eh
8.4. CYCLE COUNTER
– Push Program button
➁
again.
• The display will show alternately “P” or the number of wash
cycles.
• The lower display
➄
shows the values from 1 to 999.
Thousands will be shown in the upper display
➅
.
– Example: 1023 wash cycles
– Max. Indication: 999 999
8.5. WATER CONSUMPTION COUNTER
– Push Program button
➁
again.
• The display will show alternately “E” or the water consumption
(liter).
• The lower display
➄
shows the values from 1 to 999.
Thousands will be shown in the upper display
➅
.
– Example: 10217 liter
– Max. Indication: 999 999